The new FFA 301 is finally available

 

The front boom is an extension of the Fiedler front boom series. The FFA 301 is intended for small municipal vehicles (narrow-gauge vehicles / centre-pivot steering vehicles).

A narrow passage width of 1.55m (depending on the work tool used) is achieved with a displacement frame with a length of 1.50m. The displacement frame has an effective lateral displacement of 1.10m. The improved visibility for the driver / operator and an equally compact transport position in front of the vehicle result from the low construction design of the front boom.

The FFA 301 is equipped with the FIEDLER-SWS® quick-change system as standard, for quick and easy changing and for the stepless rotation of the work tool by up to 360°. For the FFA 301 there is an extensive selection of work tools available, such as: branch shears, ground drill, flat mower head, trencher, hedge trimmer, delineators washing brush, flail mower head, stump cutter, or weed brush.

The max. boom size distance from the centre of the vehicle is approx. 3.00m when working with the FSMK 1000 flail mower head. Right and left-hand work is possible as with all front booms, the conversion time is less than 5 minutes. Safety is ensured by the double-acting hydraulic safety device (30° each) with gas spring accumulators and automatic reset.

Stability and mobility are ensured by the adjustable prism guides on the sliding part and high strength bronze bushings in the joints. The longevity is guaranteed by the special painting (all parts are blasted and treated according to corrosion protection class C5).

 

Technical specifications:

 

Weight:

approx. 290kg (depending on the equipment)

L x W x H:

597 x 1520 x 864 mm (transport position with FSMK 1000)

Oil demand:

Professional control - “proportional”

25 l/min at 180 bar (Proportional control block)

Municipal control - “black / white”

15 l/min at 200 bar (black/white control block)

Direct contro

5 l/min at 200 bar (1x DW function with floating position for AWZ)

5 l/min at 200 bar (1x DW function with floating position for main bracket)

5 l/min at 200 bar (1x DW function for auxiliary bracket)

20 l/min at 200 bar (1x DW function for shunting)