Attachment spreader
- Multimatic - Control FMC
- EASY - Control FMC
- Data collection
- semi-automatic controls
- Remote control for spreading adjustment
FWS200
- Road grit container is hung in place of the tailboard wall
- Platform insert for overload protection of the vehicle with 250 l capacity
- easy installation
- Container volume: 120 liter
- Spreading width: 0.90 m - perfect spreading pattern
- for pourable road grit (e.g. grit, sand, salt mixtures, sand-salt mixtures)
- Stainless steel cams
- Filling the spreader by tilting the three-way tipper
- Setting the spreading volume via the restriction valve at the spreader
- Locking lever on the container for emptying at standstill
- Stirring shaft for loosening the road grit
- exchangeable cams on the discharge shaft
- all bearings can be lubricated
- height-adjustable chassis, with a braked wheel each, RAL 7016
- Series color: municipal orange RAL 2011 in corrosion protection class C5
- Container internal surfaces are additionally provided with a stone guard
- Screw points for license plate repetition
- Protective grille according to UVV powder coated RAL 7016
- Warning mark red / white on reflective foil with inscription “Winter service” according to DIN 30710 / German Road Traffic Permit Act (StVZO)
optional:
- fully automatic-speed-dependent control
- Option as combination spreader
FWS350
- Road grit container is hung at the rear
- easy installation - without drilling holes in the three-way tipper
- Container volume: 350 liters
- Spreading width: 1.20 m - perfect spreading pattern
- for pourable road grit (e.g. grit, sand, salt mixtures, sand-salt mixtures)
- Stainless steel cams screwed
- Filling the spreader by tilting the three-way tipper
- Bulkhead partition for separating the three-way tipper in two spaces, one of which is used as a counterweight and the other as a road grit stockpile. The bulkhead is installed without drilling holes in the three-way tipper.
- optional: Stainless steel retainer weight - Setting the spreading volume via the restriction valve at the spreader
- Locking lever on the container for emptying at standstill
- Stirring shaft for loosening the road grit
- exchangeable cams on the discharge shaft
- all bearings can be lubricated
- height-adjustable chassis, with a braked wheel each, powder-coated RAL 7016
- Series color: municipal orange RAL 2011 in corrosion protection class C5
- Container internal surfaces are additionally provided with a stone guard
- Screw points for license plate repetition
- Protective grille according to UVV powder coated RAL 7016
- Warning mark red / white on reflective foil with inscription “Winter service” according to DIN 30710 / German Road Traffic Permit Act (StVZO)
optional:
- Roof arch frame with tarpaulin
- fully automatic-speed-dependent control
FWS350K
- Width: 1.15 m – 1.45 m depending on type
- Conversion kit on combination spreader (additional unit with spreading plate)
- Screw conveyor system towards the center-mounted spreading plate
- Spreading unit completely made of stainless steel
- for pourable road grit (e.g. grit, sand, salt mixtures)
- Spreading plate width: approx. 1.00 .... 8.00 m - depending on road grit
- Throw distance adjustment by changing the spreading plate speed via throttle valve on the spreader
- Setting the spreading volume via the restriction valve at the spreader
- mechanical asymmetric spreading pattern adjustment by adjusting the spreading plate
- optional:
- Spreading control via reversing spotlight, which is directed to the spreading plate
- Electrical switching from the cab between roller and plate spreader during the spreading process
FWS200K
- Conversion kit on combination spreader (additional unit with spreading plate)
- Screw conveyor system towards the center-mounted spreading plate
- Spreading unit completely made of stainless steel
- for pourable road grit (e.g. grit, sand, salt mixtures)
- Spreading plate width: approx. 1.00 .... 8.00 m - depending on road grit
- Throw distance adjustment by changing the spreading plate speed via throttle valve on the spreader
- Setting the spreading volume via the restriction valve at the spreader
- mechanical asymmetric spreading pattern adjustment by adjusting the spreading plate
- optional:
- Spreading control via reversing spotlight, which is directed to the spreading plate
- Electrical switching from the cab between roller and plate spreader during the spreading process
