Features
- Available control variants of the booms
- K - black-white
- P - proportional
- Control via FMC with the variants, depending on the control variant (Control panels)
- EASYControl (3D-Maus)
- Multimatic Control (multifunction joystick)
- including parking device with chassis and brakes
- Optionally with data acquisition
Cleveres Schnellwechselsystem – Werkzeugwechsel im Handumdrehen
Unser Schnellwechselsystem FIEDLER-SWS® ermöglicht den Wechsel des Anbaugerätes in wenigen Minuten und das von nur einer Person. Durch die stufenlose Drehbarkeit um 360° können die Anbaugeräte immer optimal positioniert werden.
Unzählige Möglichkeiten: Mit unserer großen Auswahl an Profi-Anbaugeräten verschiedenster Art können Sie den Frontausleger das ganze Jahr über effektiv nutzen.
Fiedler pouring arm comparison: Which model suits your requirements?
Fiedler front loader comparison: Which model suits your requirements?
| Features | FFA 201 | FFA 301 | FFA 401 | FFA 421 | FFA 441 | FFA 451 | FFA 500 | FFA 700 |
|---|---|---|---|---|---|---|---|---|
| Reach with mower head from vehicle centre | 2.35 | 3.22 m | 3.65 m | 4.20 | 4.65 m | 4.80 m | 5.00 m | 7.00 m |
| Shift | 1.08 m | 1.10 m | 1.25 m | 1.50 m | 1.30 m | 1.60 m | 1.85 m | 1.85 m |
| Passage width | 1.52 m | 1.52 m | 1.65 m | 1.90 m | 1.70 m | 2.00 m | 2.60 m | 2.60 m |
| Weight | approx. 250 kg | approx. 300 kg | approx. 355 kg | approx. 365 kg | approx. 350 kg | approx. 400 kg | approx. 940 kg | approx. 1,430 kg |
| Weight of own oil supply (optional) | - | approx. 310 kg | approx. 310 kg | approx. 310 kg | approx. 310 kg | approx. 310 kg | approx. 340 kg | approx. 340 kg |
| Operating voltage | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V |
FFA201
- Delivery width approx. 2.30 m from the center of the vehicle (when working with flail mower head FSMK 1000)
- Shifting frame 1.52 m with an effective side shift of:
- 0.75 m without FZ bracing
- 1.08 m with FZ bracing
- Right and left-hand work possible
- Compact transport position in front of the vehicle
- Adjustable prismatic guides in the sliding part
- Hydraulic collision protection acting on both sides (30° each) with gas spring accumulators and automatic reset
- FIEDLER-SWS® quick-change system for quick and easy changing and stepless 360° rotation of the working tool
- High-strength bronze bushes in the joints
- Felt oiler for cleaning and greasing the guideway
- Coloring:
- all parts are blasted
- Coloring according to corrosion protection class C5
- 2-layer structure using powder coating zinc primer and PUR top coat - extremely resilient
- Hydraulic collision protection with gas spring accumulator with automatic swing-back function
- Control directly via the vehicle controls
- Including parking device with chassis and brakes
- Not included in the scope of delivery:
- Torsion frame, work tools
- Separate rear weight may be required
Optional:
- Working tools
- Flail mower head, delineator washing brush (without automatic washing system), weed brush
Technical data:
- Weight: approx. 250 kg (without AWZ / adjustment group)
- L x W x H: 600 x 1525 x 926 mm (without AWZ / adjustment group)
- Oil requirement:
- 8 - 65 l/min from 180 bar (1x working circuit with pressure, return and leakage oil depending on AWZ)
- 5 l/min at 200 bar (1x EW- /
FFA301
- Boom width up to approx. 3.00m
- Sliding frame width 1.50m, effective lateral displacement 1.10m
- Work left and right possible
- Compact transport position in front of the vehicle
- Adjustable prismatic guides in the sliding part
- Double acting hydraulic collision protection (each 30°) with gas spring accumulators and automatic resetting
- With automatic copying and adjustable device cushioning
- FIEDLER-SWS® quick-change system for fast and problem-free working tool change
- High-strength bronze bushings in the joints
Optional:
- Working tools
- Lopper, ground drill, flat mower head, ditch cutter, hedge trimmer, delineators washing brush, flail mower head, stump cutter, weed brush
Technical specifications:
(All information without AWZ and without FZ mounting bracket)
- Weight: approx. 290kg (depending on the equipment)
- L × W × H: 597 x 1,520 x 864 (mm)
- Oil consumption:
- Control variants K: 15l/min at 200bar (steer block FFA)
- Control variants P: 25l/min at 180bar (steer block FFA)
- Colour: Utility services orange RAL 2011
FFA401
- Boom width up to approx. 4.00 m depending on displacement frame width (1.65 m)
- Weight with mowing head 460 kg
- Guideways of the displacement frame in stainless steel with felt oilers
- hydraulic / elastic breakaway device
- with automatic copying and adjustable implement cushioning
- for the FIEDLER quick-change system (tool exchange in approx. 5 min)
- Changing from right to left boom
FFA421
- Boom width up to approx. 4.20 m depending on displacement frame width (1.90 m)
- Weight with mowing head 480 kg
- Guideways of the displacement frame in stainless steel with felt oilers
- hydraulic / elastic breakaway device
- with automatic copying and adjustable implement cushioning
- for the FIEDLER quick-change system
- Changing from right to left boom
FFA441
- Max. outreach: 4.40 m from the center of the vehicle (when working with flail mower head [FSMK1000])
- 1.65 m - effective side shift 1.25 m
- Right and left-hand work possible
- Compact transport position in front of the vehicle
- Adjustable prism guides in the pushing section
- Hydraulic collision protection acting on both sides (30° each) with gas spring accumulators and automatic reset
- FIEDLER-SWS® quick-change system for quick and easy changing and stepless 360° rotation of the working tool
- High-strength bronze bushes in the joints
- all parts are blasted, coloring according to corrosion protection class C5
- electro-hydraulic proportional control
- via FMC multifunction display (standard) and multifunction joystick
- Including Copytronic on CAN-BUS basis
- Recording of support forces via pressure sensor
- Presetting of arm relief - automatic copy control
- Switchable ground pressure relief of the extension arm and floating position for adapting the flail mower head to the terrain profile
- "Switch off floating position in mowing head" function when lifting the main arm and actuating the side shift
- Separate rear weight, torsion frame and working tool required (not included in the scope of delivery)
Options:
- Working tools:
- Branch shears, soil auger, flat mower head, trencher,
- hedge trimmer, delineator washing brush, flail mower head,
- stump grinder, weed brush, washing brush
- Own oil supply:
- to drive the working tool via front PTO shaft (up to 1,000 min-1)
- Volume flow setting max. 70 l/min at 300 bar
- Oil tank 35 ... 45 liters on the skidding frame
- Axial piston pump enables working at low engine speeds (PTO speed in mowing mode approx. 600 ... 700 min-1)
Technical data:
- Weight:
- approx. 380 kg (depending on equipment, without AWZ)
- 573 kg (with own oil supply, without AWZ / mounting plate)
- L x W x H: 1070 x 1700 x 1174 (mm)
- Oil requirement: 25 l/min at 180 bar (control block FFA)
- Color: Municipal orange RAL 2011
FFA451
- Boom width up to approx. 4.50 m depending on displacement frame width (2.0 m)
- Weight with mowing head 580 kg
- Guideways of the displacement frame in stainless steel with felt oilers
- hydraulic / elastic breakaway device
- with automatic copying and adjustable implement cushioning
- for the FIEDLER quick-change system
- Changing from right to left boom
FFA500
- Boom width 5.00 m from the center of the vehicle
- Mowing head 1.25 m working width, turned blades, belt drive
- Proportional control via FMC and joystick
- Guideways of the displacement frame in stainless steel with felt oilers
- Hydraulic / elastic breakaway device forwards and backwards
- Changing from right to left boom in approx. 5 minutes
- with automatic copying and adjustable implement cushioning
- for the FIEDLER quick-change system
- Tare weight with mowing head and own oil supply 1100 kg
- Lateral displacement 1.65 m
FFA700
- Boom width 6.85 m from the center of the vehicle
- Mowing head 1.25 m working width, turned blades, belt drive
- Proportional control via FMC and joystick
- Guideways of the displacement frame in stainless steel with felt oilers
- Hydraulic / elastic breakaway device forwards and backwards
- Changing from right to left boom in approx. 5 minutes
- with automatic copying and adjustable implement cushioning
- for the FIEDLER quick-change system
- Tare weight with mowing head and own oil supply 1325 kg
- Lateral displacement 1.65 m
Intelligente Steuerung mit der FIEDLER FMC
Vergessen Sie ruckartige Bewegungen. Unsere proportionale CAN-BUS-Steuerung garantiert flüssige Arbeitsabläufe ohne Nachlaufen.
Die preisgekrönte FIEDLER FMC Steuerung bietet Ihnen unter anderem:
- Geräteerkennung: Die FMC erkennt das Anbaugerät an dem Frontausleger und startet automatisch die jeweilige Bedienoberfläche, um alle Funktionen für dieses abrufen zu können.
- Entlastung: Zahlreiche Automatikprogramme unterstützen den Fahrer und erhöhen die Arbeitssicherheit.
Digitales Management –
Gießnachweis und Tourenplanung
Digitalisieren Sie Ihre Arbeitsabläufe mit unserer optionalen Datenerfassung. Das System unterstützt Sie proaktiv bei der Ressourcenplanung:
- Planung: Optimieren Sie Ihre Touren und Arbeitsabläufe vorab am PC.
- Dokumentation: Erstellen Sie auf Knopfdruck rechtssichere Arbeitsnachweise.
Auswertung: Rufen Sie alle Leistungsdaten direkt nach der Tour ab – für maximale Transparenz gegenüber Auftraggebern.
10 most important FAQs about front loaders
A front loader is a hydraulically controlled working arm that is mounted on the front panel of a carrier vehicle (e.g. Multicar, Unimog or tractor). In the municipal sector, it is primarily used for road maintenance, in particular for mowing verges, clearing right-of-way profiles and many other tasks.
The Fiedler front loader is a true multi-tool for year-round use.
The available tools in various designs include: Flail mower head / flat mower head / hedge trimmer / loppers / trencher / stump grinder / earth auger / weed brush / guide post washing brush / tunnel washing brush / washing brush / hedge trimmer / double blade / clearance profile cutter / shower head
Enormous lever forces are exerted when the arm is extended to its maximum. The following systems are used to prevent tipping:
Front axle lock: Prevents the outer side of the curve from sagging.
Counterweights: Ballast mounted in the rear.
Torsion frame: To stabilise the vehicle frame.
Neither axle lock nor torsion frame is necessary with the FFA 201 front boom.
Fiedler relies on "Made in Germany" with high-quality components and materials:
Stainless steel guide rails and felt oilers ensure minimal wear on the sliding frame
All parts that are not made of stainless steel are given a C5-long powder coating before assembly – the highest corrosion protection class
Wear- and play-free Ionit Ox-coated bearings are used
High-strength bronze bushings in the joints